The Making of 1/8 Rain Mikamura

  Groundwork > Washing & Priming > Painting > Touch-Up

Washing
This kit is wash again just before priming. I am soaking it in water and dishwashing liquid overnight. It is then scrubbed with an electric toothbrush.


Priming
The parts are pinned for priming. I got sick on using blue tack to hold the pin for painting. I got myself a large piece of Styrofoam sheet from an art shop, cut it to 2 small blocks. These blocks comes in very handy holding the pin. I should have done this earlier.


Re-Sand
The usual prime and then spot the flaw process. The sleeves is re-sanded again for a complete smooth surface.

Her hair band is sanded again.

Eyes are masked with Liquid Mask before painting.


< Previous   Next >

Document Date : 11.01.2006


Responses to this page:

  1. No comment found on this page.

Leave a Reply

Name: * Required
Email: * Will not be published
Homepage:
Comment: