	Building MG, The Express Way
	STEP 1 - Painting Runners > STEP 2 - Building > STEP 3 - Touch Up > STEP 4 - Panel Line & Decals


STEP 4 - Panel Line & Decals
	The next step should be panel lining the kits. I am using Gundam Real Touch Marker instead of oil. It is faster and less messy. (These steps are almost similar to building my MG Shinning Gundam) Alternatively, Gundam Marker and pigment pen can be use. Panel lining requires about 1 1/2 hour to complete.
	Decals are applied. The photo show applied a dry transfer decal. You need a cell-tape or masking tape to tapered the cut-out sticker to fixed the position. Use a pencil (do not use mechanical pencil) and rub on the sticker to transfer it to the surface. Applying decals will take less than an hour.

The completed model can be found at 1/100 MG RGM-79 GM.

Next >

Document Date : 18.01.2006

Responses to this page:

No comment found on this page.

Leave a Reply